The Roland micro-Cube RX 5-Watt Wonder. I started using mine live and decided to make some mods especially for Live Applications. More Mods to Come . Taking apart the Micro-Cube might be the most difficult part! Once you .

The Marriage of Tube and Screamer! Although I chose the TS-5 for my Frankenstien, you can use any of the TS series. Here is the modified Tube Screamer guts schematic. Click the image to enlarge it. The TS-12AX7 mods are shown in blue. The 47k resistor on the inverting input of the clipper circuit has been lowered to 1k. This increases the gain almost five-fold for the clipping stage.

My chorus always seemed to mush out the sound and get lost in the mix. Have you ever wanted a Chorus with a LOUDER output and more drive? LFO Mod for Triangle to Sawtooth Morph Extended Rate; this Mod can sound like a rotary speaker and extends the maximum Rate as well. Click on a picture to enlarge it -. The top diagram is the bare circuit. The lower diagram shows the areas of interest for these mods. I made changes to each of these sections for each mod in the list.

These mods gave me a whole new device, especially my Pulsar mod. LFO Pulsar Mod for a very unique Throbbing phaser. Output Gain Mod for a beefier output. Here are the schematics for the PH-2. Click on a picture to enlarge it. The top schematic is the bare unedited design.

The TS-808, Bass Boost and Distortion mods and schematics were based on ideas I found here. These include two resistors in the output, R1 and R2 here.