MUFFLERMOD.BLOGSPOT.COM HOST
Our parsers identified that a lone page on mufflermod.blogspot.com took six hundred and forty-four milliseconds to come up. We could not find a SSL certificate, so our crawlers consider mufflermod.blogspot.com not secure.
Internet Protocol
172.217.3.33
WEBSITE IMAGE
SERVER OS AND ENCODING
I found that this domain is operating the GSE server.PAGE TITLE
Custom Ninja 250 MufflerDESCRIPTION
Custom Ninja 250 Muffler. Wednesday, June 1, 2011. How to Modify Your Stock Muffler, Part 2. I cut a 2 inch hole in the muffler end cap that was cut off 2 18 would probably work too. Center the hole between the threaded bosses. This is after grinding the edge clean to prepare to weld. This was a 5 piece of tail pipe from an auto store that fits over a 2 OD tube and tapers back down to 2 OD. I cut it to size with the band saw. I cut to the right length to fit just snug in the end. Cap and against .CONTENT
This web page mufflermod.blogspot.com states the following, "Wednesday, June 1, 2011." We saw that the webpage said " How to Modify Your Stock Muffler, Part 2." It also said " I cut a 2 inch hole in the muffler end cap that was cut off 2 18 would probably work too. Center the hole between the threaded bosses. This is after grinding the edge clean to prepare to weld. This was a 5 piece of tail pipe from an auto store that fits over a 2 OD tube and tapers back down to 2 OD. I cut it to size with the band saw. I cut to the right length to fit just snug in the end."